General Plumbing in Charlestown
Gas Fitting Charlestown
Cooktops, heaters, bayonet points, new gas runs and leak repairs: we do the lot, every joint tested and every job certified before we leave the driveway.
It sits inside the general plumbing work we do around Charlestown, alongside the full plumbing range. One crew, one quote, and nothing signed off until it passes. Ring (02) 4063 3450 and tell us what you're planning.
What we fit, run and repair
Gas work is mostly a short list of jobs done well, so here's the range:
Cooktop and oven connections
New cooktops and wall ovens get a compliant isolation tap, a tidy connection at the appliance bay, and we leak-test every joint before the first burner lights.
Bayonet points for gas heaters
A bayonet on the lounge room wall lets a gas heater move between rooms through winter. The line gets run, the point fitted with an isolation tap, and it leaves certified.
BBQ points and outdoor gas
An outdoor bayonet ends the flat-bottle-on-a-Saturday problem. We extend the line to the patio or alfresco, fit the point, pressure test the new section and leave it certified.
Gas leak checks and repairs
A smell of gas, a hiss or yellow appliance flames all get treated the same way. We isolate the run, find the leak, repair it and test before restoring supply.
New gas runs and upgrades
Adding gas to a house that never had it, upsizing a line for a bigger appliance or swapping old steel pipe for copper, sized for whatever joins the run next.
Testing and compliance certificates
Every job closes out with a pressure test on the whole line, joints checked one by one and the compliance certificate issued, so the work is on record from day one.
Older homes, new gas lines
Plenty of the housing stock here dates from the postwar decades, brick veneer and weatherboard family homes built before gas was standard in every room. At the last census this was a mostly owner-occupied suburb, and owners who've held the same house for years keep adding to it.
So the typical job list looks like this:
- A bayonet point added one winter so the heater can shift rooms
- A BBQ point run out to the patio the following spring
- An old steel section replaced with copper when a bigger appliance joins the line
- A whole run pressure tested and certified before the house goes to market
Winters on the ridge run colder and windier than the coastal side of Lake Macquarie, and homes climbing the ridge off Warners Bay Road feel it first. Gas heaters work hard from June through August, and tired runs behind older wall furnaces get found out at the first relight of the season.
Booking a conversion or a new run
Most people underestimate how straightforward a gas addition is once it's on the calendar. The steps run the same way every time:
- 1
You ring and describe the appliance and where it's going
- 2
We quote the run, the fittings and the testing as one figure
- 3
The line goes in, gets pressure tested and certified
- 4
The appliance is commissioned and you sign off on a working job
No second tradie, no waiting on a different contractor for the compliance paperwork.
How a gas job runs
- 1
Call and tell us
Ring (02) 4063 3450 and tell us what's going on in Charlestown. We'll ask a few quick questions so the right gear is on the truck the first time.
- 2
Quote before work
You get the price before anything starts. No call-out fee, no hourly surprises, you approve the quote or we shake hands and leave, no charge.
- 3
Fit and test
The supply is isolated and the new line pressure tested to code, then each appliance is commissioned, leak-checked at every joint and left burning the way it should.
- 4
Backed, no questions asked
If something isn't up to standard afterwards, we come back and make it right, no questions asked. That's the standard every Charlestown job is held to.
Why locals ring us for gas
$0 Call Out
Quote First, Always
Licensed Local Plumbers
Made Right, No Questions Asked
Either way, the call is free and the price comes before anything starts.
Gas fitting FAQs
Are gas jobs done by licensed gas fitters?
It is licensed work. Gas fitting is a licensed trade in NSW, so licensed gas fitters handle every job here, each connection gets leak-tested and the compliance certificate is issued once it passes.
How much will my gas job cost?
You get the price in writing before anything starts. The $0 call out means asking is free, and the quote covers the run, fittings and testing, so there are no surprises.
Can you add a bayonet point for my heater or BBQ?
Both. We run the line from the meter or nearest branch, fit the bayonet with its isolation tap, pressure test the section and certificate it, indoors or out on the patio.
What should I do if I smell gas inside?
Turn the gas off at the meter, open windows and doors and don't flip switches or light anything. Then ring us so we can find and repair the leak.
Can you connect a gas hot water system?
Yes. Gas storage tanks and continuous flow units both get connected, commissioned and certified, and if the old system is timing out we'll walk you through replacement options.
Do you cover the suburbs around here?
We do. Kahibah, Gateshead, Whitebridge, Mount Hutton and Adamstown Heights all sit on the regular run, so a bayonet out there gets the same quote-first treatment as a job in town.
Where gas work connects to the rest
A lot of gas jobs arrive attached to other work, so the related pages live here:
Plumbers in Charlestown and the suburbs around it
Get a quote on your gas work
Call (02) 4063 3450 and tell us what's happening. $0 call out across Charlestown, a clear quote before any work starts, and a job that gets made right if it isn't right the first time.